+86 159 3903 7000 [email protected]
Mon–Sat 8:00–20:00
EN ▾
English Español عربي Русский
Get a Quote
Products ▸
Grain Bins
Flat-Bottom Grain Bin Hopper-Bottom Grain Bin Feed Silo Commercial Silo Wood Pellet Silo
Grain Dryers
Continuous Grain Drying Tower Batch Grain Dryer Tower
Handling Equipment
Bucket Elevator Belt Conveyor Drag / Chain Conveyor Grain Auger
Aeration & Monitoring
Aeration System Grain Monitoring & Temperature Cable System
Grain Cleaning & Grading
Grain Cleaning & Grading Equipment
Accessories
Grain Distributor / Handling Tower Storage Accessories
Solutions ▸
Corn Storage Wheat Storage Soybean Storage Rice Storage Farm-Scale Commercial Elevator Export Terminal Seed Storage
Industries ▸
On-Farm Storage Commercial Grain Elevator Agricultural Cooperative Export Terminal Food & Feed Processing Seed Storage
Projects
Knowledge ▸
Engineering Grain Science Installation Maintenance & Troubleshooting Buying Guides Storage by Crop Troubleshooting
Resources ▸
Brochures Spec Sheets CAD Files Manuals
Tools About FAQ Contact

FAQ

Answers to common questions about grain storage and handling.

Search FAQ

installation

10 questions
How long does it take to install a grain bin? ▼
Installation Timelines:

Bolted Bins:

  • Small (10-50t): 2-5 days
  • Medium (50-200t): 5-10 days
  • Large (200-500t): 10-20 days

Foundation: Adds 2-4 weeks

What site preparation is needed for grain bin installation? ▼
Pre-Installation Requirements:
  • Site Investigation: Topographic survey, geotechnical assessment
  • Site Preparation: Clearing, grading, access roads
  • Foundation: Soil compaction, reinforcement, anchor bolts
What foundation type is required for grain bins? ▼
Foundation Types:
  • Ring Beam: Small to medium bins (under 500 tonnes)
  • Mat Foundation: Medium to large bins (500-5000 tonnes)
  • Piled Foundation: Poor soil conditions, very large bins
Can grain bins be installed in windy or seismic areas? ▼
Design for Environmental Loads:
  • Wind Load: Design per ASCE 7, Eurocode 1
  • Seismic Design: Per ASCE 7, Eurocode 8

Our engineering team performs site-specific load calculations for extreme conditions.

What is the difference between bolted and welded grain bins? ▼
Bolted Bins: Faster installation, no hot work, easily expanded

Welded Bins: Airtight construction, thicker plates, lower maintenance

How is grain bin alignment and verticality ensured? ▼
Alignment Methods:
  • Foundation: Precision leveling of embedded plates
  • During Erection: Laser leveling, total station surveying
  • Tolerance: H/1000 verticality, ±D/500 roundness
What safety measures are required during installation? ▼
Safety Requirements:
  • Work at Height: Fall protection, guardrails
  • Lifting: Certified operators, lift plans
  • Hot Work: Permits, fire watch
What testing is performed after installation? ▼
Post-Installation Testing:
  • Structural: Visual inspection, NDT, verticality survey
  • Leak Testing: Pressure test for gas-tight bins
  • Operational: Fill/discharge, aeration, level instruments
Do you provide installation supervision? ▼
Installation Support:
  • Supervisor-Only: Technical guidance and quality control
  • Full Installation: Complete installation by our crews
  • Training: Train your crew for self-installation
What permits are needed for grain bin construction? ▼
Common Permits:
  • Building Permits: Structural, electrical
  • Other Approvals: Zoning, environmental

We assist with permit drawings and engineering calculations.

Still Have Questions?

Our team is ready to help with your grain storage project.

Contact Us